iZ Technology Corporation

Howdy,

Has anyone used RADAR with the Presonus FireStudio LightPipe? This is a box that interfaces up to 32 channels of audio via 4 ADAT optical i/o cables and connects to your DAW via a FireWire cable.

I bought one of these boxes hoping to be able to interface all 24 tracks of my RADAR with Digital Performer with the idea that I could use DP for automation and some plug-in-processing, but then being able to sum through my console - and of course to be able to transfer audio out of RADAR.

I am able to see the level indicators on the Firestudio Lightpipe move when playing back audio on the RADAR, and I can even see the audio levels in the Mac-based FireStudio cue-mixer application, but I have been unable to get Digital Performer to hear any of the audio or record any of it.

I have the Firestudio Lightpipe listening to the RADAR's Wordclock. I have DP set to use the Firestudio Lightpipe as the i/o device and use the Wordclock for sync.

Has anyone else used a Firestudio Lightpipe in this configuration? Or has anyone had trouble with MOTU's DP in a similar situation?

Any suggestions would be appreciated.


thanks,

-dave

Did you ever get this to work? I was just about to buy the same setup when I saw this message.

Radar must be set to receive digital in ( ADAT ) and the channels on Radar must be armed in order to have Radar work as a D/A